The procedure for certification of production

• 1. Submission of application for attestation of production according to the established form (the application is submitted on the official form of the enterprise-customer, signed by the authorized representative of the customer. Along with the application is provided a questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the following e-mail address: dorsert@ukr.net);
• 2. Preliminary assessment (examination of source materials provided by the Applicant);
• 3. Preparation and signing of the contract;
• 4. Development of instructions for certification of technical capabilities;
• 5. Conclusion on the readiness of the enterprise to conduct production certification;
• 6. Preparation of the program and methods of certification;
• 7. Production inspection;
• 8. Certification of technical capabilities of production;
• 9. Product testing;
• 10. Issuance (non-issuance) of a production certificate and its registration

For questions about the certification of production, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Attestat example

The procedure for certification of production

• 1. Submission of application for attestation of production according to the established form (the application is submitted on the official form of the enterprise-customer, signed by the authorized representative of the customer. Along with the application is provided a questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the following e-mail address: dorsert@ukr.net);
• 2. Preliminary assessment (examination of source materials provided by the Applicant);
• 3. Preparation and signing of the contract;
• 4. Development of instructions for certification of technical capabilities;
• 5. Conclusion on the readiness of the enterprise to conduct production certification;
• 6. Preparation of the program and methods of certification;
• 7. Production inspection;
• 8. Certification of technical capabilities of production;
• 9. Product testing;
• 10. Issuance (non-issuance) of a production certificate and its registration

For questions about the certification of production, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Attestat example

The procedure for certification of production

• 1. Submission of application for attestation of production according to the established form (the application is submitted on the official form of the enterprise-customer, signed by the authorized representative of the customer. Along with the application is provided a questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the following e-mail address: dorsert@ukr.net);
• 2. Preliminary assessment (examination of source materials provided by the Applicant);
• 3. Preparation and signing of the contract;
• 4. Development of instructions for certification of technical capabilities;
• 5. Conclusion on the readiness of the enterprise to conduct production certification;
• 6. Preparation of the program and methods of certification;
• 7. Production inspection;
• 8. Certification of technical capabilities of production;
• 9. Product testing;
• 10. Issuance (non-issuance) of a production certificate and its registration

For questions about the certification of production, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Attestat example

The procedure for certification of production

• 1. Submission of application for attestation of production according to the established form (the application is submitted on the official form of the enterprise-customer, signed by the authorized representative of the customer. Along with the application is provided a questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the following e-mail address: dorsert@ukr.net);
• 2. Preliminary assessment (examination of source materials provided by the Applicant);
• 3. Preparation and signing of the contract;
• 4. Development of instructions for certification of technical capabilities;
• 5. Conclusion on the readiness of the enterprise to conduct production certification;
• 6. Preparation of the program and methods of certification;
• 7. Production inspection;
• 8. Certification of technical capabilities of production;
• 9. Product testing;
• 10. Issuance (non-issuance) of a production certificate and its registration

For questions about the certification of production, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Attestat example

The procedure for certification of production

• 1. Submission of application for attestation of production according to the established form (the application is submitted on the official form of the enterprise-customer, signed by the authorized representative of the customer. Along with the application is provided a questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the following e-mail address: dorsert@ukr.net);
• 2. Preliminary assessment (examination of source materials provided by the Applicant);
• 3. Preparation and signing of the contract;
• 4. Development of instructions for certification of technical capabilities;
• 5. Conclusion on the readiness of the enterprise to conduct production certification;
• 6. Preparation of the program and methods of certification;
• 7. Production inspection;
• 8. Certification of technical capabilities of production;
• 9. Product testing;
• 10. Issuance (non-issuance) of a production certificate and its registration

For questions about the certification of production, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Attestat example

The procedure for certification of production

• 1. Submission of application for attestation of production according to the established form (the application is submitted on the official form of the enterprise-customer, signed by the authorized representative of the customer. Along with the application is provided a questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the following e-mail address: dorsert@ukr.net);
• 2. Preliminary assessment (examination of source materials provided by the Applicant);
• 3. Preparation and signing of the contract;
• 4. Development of instructions for certification of technical capabilities;
• 5. Conclusion on the readiness of the enterprise to conduct production certification;
• 6. Preparation of the program and methods of certification;
• 7. Production inspection;
• 8. Certification of technical capabilities of production;
• 9. Product testing;
• 10. Issuance (non-issuance) of a production certificate and its registration

For questions about the certification of production, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Attestat example

The procedure for certification of production

• 1. Submission of application for attestation of production according to the established form (the application is submitted on the official form of the enterprise-customer, signed by the authorized representative of the customer. Along with the application is provided a questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the following e-mail address: dorsert@ukr.net);
• 2. Preliminary assessment (examination of source materials provided by the Applicant);
• 3. Preparation and signing of the contract;
• 4. Development of instructions for certification of technical capabilities;
• 5. Conclusion on the readiness of the enterprise to conduct production certification;
• 6. Preparation of the program and methods of certification;
• 7. Production inspection;
• 8. Certification of technical capabilities of production;
• 9. Product testing;
• 10. Issuance (non-issuance) of a production certificate and its registration

For questions about the certification of production, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Attestat example

The procedure for attesting compliance

• 1. Submission of application for attestation of compliance in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about the car. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Preliminary assessment (examination of source materials provided by the Applicant);
• 3. Preparation and signing of the contract;
• 4. Development of instructions for certification of technical capabilities;
• 5. Conclusion on the readiness of the enterprise to conduct certification of compliance;
• 6. Preparation of the program and methods of certification;
• 7. Compliance check;
• 8. Issuance (non-issuance) of a certificate of conformity and its registration

For questions about the certification of production, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Attestat example

The procedure for attesting compliance

• 1. Submission of application for attestation of compliance in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about the car. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Preliminary assessment (examination of source materials provided by the Applicant);
• 3. Preparation and signing of the contract;
• 4. Development of instructions for certification of technical capabilities;
• 5. Conclusion on the readiness of the enterprise to conduct certification of compliance;
• 6. Preparation of the program and methods of certification;
• 7. Compliance check;
• 8. Issuance (non-issuance) of a certificate of conformity and its registration

For questions about the certification of production, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Attestat example

The main indicator of ensuring the consumer properties of the highway and artificial structures on it is strength.
The strength of the road structure is characterized by deformation characteristics.
Deformation characteristics of the road structure (total modulus of elasticity, total modulus of deformation, etc.) are determined by stamp tests (static and dynamic) according to DSTU B B.2.3-42: 2016 “Methods for determining the deformation characteristics of the ground and pavement”.
The quality of concrete of artificial structures is assessed on the basis of its strength, which is determined in laboratory and field conditions. Non-destructive testing devices are used to assess the strength of concrete structures in the field. Measurements are carried out in accordance with the requirements of DSTU B B.2.7-220: 2009 “Concretes. Determination of strength by mechanical methods of non-destructive testing.

The main indicator of ensuring the consumer properties of the highway and artificial structures on it is strength.
The strength of the road structure is characterized by deformation characteristics.
Deformation characteristics of the road structure (total modulus of elasticity, total modulus of deformation, etc.) are determined by stamp tests (static and dynamic) according to DSTU B B.2.3-42: 2016 “Methods for determining the deformation characteristics of the ground and pavement”.
The quality of concrete of artificial structures is assessed on the basis of its strength, which is determined in laboratory and field conditions. Non-destructive testing devices are used to assess the strength of concrete structures in the field. Measurements are carried out in accordance with the requirements of DSTU B B.2.7-220: 2009 “Concretes. Determination of strength by mechanical methods of non-destructive testing.

The main indicator of ensuring the consumer properties of the highway and artificial structures on it is strength.
The strength of the road structure is characterized by deformation characteristics.
Deformation characteristics of the road structure (total modulus of elasticity, total modulus of deformation, etc.) are determined by stamp tests (static and dynamic) according to DSTU B B.2.3-42: 2016 “Methods for determining the deformation characteristics of the ground and pavement”.
The quality of concrete of artificial structures is assessed on the basis of its strength, which is determined in laboratory and field conditions. Non-destructive testing devices are used to assess the strength of concrete structures in the field. Measurements are carried out in accordance with the requirements of DSTU B B.2.7-220: 2009 “Concretes. Determination of strength by mechanical methods of non-destructive testing.

The main indicator of ensuring the consumer properties of the highway and artificial structures on it is strength.
The strength of the road structure is characterized by deformation characteristics.
Deformation characteristics of the road structure (total modulus of elasticity, total modulus of deformation, etc.) are determined by stamp tests (static and dynamic) according to DSTU B B.2.3-42: 2016 “Methods for determining the deformation characteristics of the ground and pavement”.
The quality of concrete of artificial structures is assessed on the basis of its strength, which is determined in laboratory and field conditions. Non-destructive testing devices are used to assess the strength of concrete structures in the field. Measurements are carried out in accordance with the requirements of DSTU B B.2.7-220: 2009 “Concretes. Determination of strength by mechanical methods of non-destructive testing.

The main indicator of ensuring the consumer properties of the highway and artificial structures on it is strength.
The strength of the road structure is characterized by deformation characteristics.
Deformation characteristics of the road structure (total modulus of elasticity, total modulus of deformation, etc.) are determined by stamp tests (static and dynamic) according to DSTU B B.2.3-42: 2016 “Methods for determining the deformation characteristics of the ground and pavement”.
The quality of concrete of artificial structures is assessed on the basis of its strength, which is determined in laboratory and field conditions. Non-destructive testing devices are used to assess the strength of concrete structures in the field. Measurements are carried out in accordance with the requirements of DSTU B B.2.7-220: 2009 “Concretes. Determination of strength by mechanical methods of non-destructive testing.

Transport and operational indicators (flatness, adhesion, roughness) and technical parameters (width of the carriageway, ground, transverse / longitudinal slope) are measured during the execution / acceptance of repair and construction works and at the stage of operation of roads.
Measurement of equality is carried out according to DSTU 8745: 2017 “Methods of measuring the irregularities of the base and pavement.”
Determination of the coefficient of adhesion and roughness parameters is carried out according to DSTU 8746: 2017 “Methods of measuring the adhesion properties of the road surface”.

Transport and operational indicators (flatness, adhesion, roughness) and technical parameters (width of the carriageway, ground, transverse / longitudinal slope) are measured during the execution / acceptance of repair and construction works and at the stage of operation of roads.
Measurement of equality is carried out according to DSTU 8745: 2017 “Methods of measuring the irregularities of the base and pavement.”
Determination of the coefficient of adhesion and roughness parameters is carried out according to DSTU 8746: 2017 “Methods of measuring the adhesion properties of the road surface”.

Transport and operational indicators (flatness, adhesion, roughness) and technical parameters (width of the carriageway, ground, transverse / longitudinal slope) are measured during the execution / acceptance of repair and construction works and at the stage of operation of roads.
Measurement of equality is carried out according to DSTU 8745: 2017 “Methods of measuring the irregularities of the base and pavement.”
Determination of the coefficient of adhesion and roughness parameters is carried out according to DSTU 8746: 2017 “Methods of measuring the adhesion properties of the road surface”.

Transport and operational indicators (flatness, adhesion, roughness) and technical parameters (width of the carriageway, ground, transverse / longitudinal slope) are measured during the execution / acceptance of repair and construction works and at the stage of operation of roads.
Measurement of equality is carried out according to DSTU 8745: 2017 “Methods of measuring the irregularities of the base and pavement.”
Determination of the coefficient of adhesion and roughness parameters is carried out according to DSTU 8746: 2017 “Methods of measuring the adhesion properties of the road surface”.

Transport and operational indicators (flatness, adhesion, roughness) and technical parameters (width of the carriageway, ground, transverse / longitudinal slope) are measured during the execution / acceptance of repair and construction works and at the stage of operation of roads.
Measurement of equality is carried out according to DSTU 8745: 2017 “Methods of measuring the irregularities of the base and pavement.”
Determination of the coefficient of adhesion and roughness parameters is carried out according to DSTU 8746: 2017 “Methods of measuring the adhesion properties of the road surface”.

Transport and operational indicators (flatness, adhesion, roughness) and technical parameters (width of the carriageway, ground, transverse / longitudinal slope) are measured during the execution / acceptance of repair and construction works and at the stage of operation of roads.
Measurement of equality is carried out according to DSTU 8745: 2017 “Methods of measuring the irregularities of the base and pavement.”
Determination of the coefficient of adhesion and roughness parameters is carried out according to DSTU 8746: 2017 “Methods of measuring the adhesion properties of the road surface”.

Transport and operational indicators (flatness, adhesion, roughness) and technical parameters (width of the carriageway, ground, transverse / longitudinal slope) are measured during the execution / acceptance of repair and construction works and at the stage of operation of roads.
Measurement of equality is carried out according to DSTU 8745: 2017 “Methods of measuring the irregularities of the base and pavement.”
Determination of the coefficient of adhesion and roughness parameters is carried out according to DSTU 8746: 2017 “Methods of measuring the adhesion properties of the road surface”.

Road markings and signs are key infrastructural safety factors, as they play a very important informative function. These means of traffic organization should inform road users about the rules of the road, the trajectory, speed and danger factors on the road. Accordingly, road markings and signs must comply with regulatory requirements.
To check the compliance of traffic management facilities with regulatory requirements, it is necessary to assess the quality of road marking; retroreflective properties of road signs.
Determination of brightness and retroreflective properties of road markings is carried out according to SOU 42.1-37641918-117: 2014 “Road safety. Road marking. Technical requirements and methods of control of indicators of light reflection and brightness».
To obtain a quick and reliable result of testing the means of traffic organization in our company there is a specialized mobile laboratory, which is equipped with the necessary modern equipment to assess the quality of road marking; retroreflective properties of road signs; as well as determining the thickness of the protective layer and the geometric parameters of the barrier fence; measuring the quality of road lighting; quality assessment of noise protection screens; measuring the coefficient of adhesion of the wheel to the coating; certification of marking machines for road marking.

Road markings and signs are key infrastructural safety factors, as they play a very important informative function. These means of traffic organization should inform road users about the rules of the road, the trajectory, speed and danger factors on the road. Accordingly, road markings and signs must comply with regulatory requirements.
To check the compliance of traffic management facilities with regulatory requirements, it is necessary to assess the quality of road marking; retroreflective properties of road signs.
Determination of brightness and retroreflective properties of road markings is carried out according to SOU 42.1-37641918-117: 2014 “Road safety. Road marking. Technical requirements and methods of control of indicators of light reflection and brightness».
To obtain a quick and reliable result of testing the means of traffic organization in our company there is a specialized mobile laboratory, which is equipped with the necessary modern equipment to assess the quality of road marking; retroreflective properties of road signs; as well as determining the thickness of the protective layer and the geometric parameters of the barrier fence; measuring the quality of road lighting; quality assessment of noise protection screens; measuring the coefficient of adhesion of the wheel to the coating; certification of marking machines for road marking.

Road markings and signs are key infrastructural safety factors, as they play a very important informative function. These means of traffic organization should inform road users about the rules of the road, the trajectory, speed and danger factors on the road. Accordingly, road markings and signs must comply with regulatory requirements.
To check the compliance of traffic management facilities with regulatory requirements, it is necessary to assess the quality of road marking; retroreflective properties of road signs.
Determination of brightness and retroreflective properties of road markings is carried out according to SOU 42.1-37641918-117: 2014 “Road safety. Road marking. Technical requirements and methods of control of indicators of light reflection and brightness».
To obtain a quick and reliable result of testing the means of traffic organization in our company there is a specialized mobile laboratory, which is equipped with the necessary modern equipment to assess the quality of road marking; retroreflective properties of road signs; as well as determining the thickness of the protective layer and the geometric parameters of the barrier fence; measuring the quality of road lighting; quality assessment of noise protection screens; measuring the coefficient of adhesion of the wheel to the coating; certification of marking machines for road marking.

Road markings and signs are key infrastructural safety factors, as they play a very important informative function. These means of traffic organization should inform road users about the rules of the road, the trajectory, speed and danger factors on the road. Accordingly, road markings and signs must comply with regulatory requirements.
To check the compliance of traffic management facilities with regulatory requirements, it is necessary to assess the quality of road marking; retroreflective properties of road signs.
Determination of brightness and retroreflective properties of road markings is carried out according to SOU 42.1-37641918-117: 2014 “Road safety. Road marking. Technical requirements and methods of control of indicators of light reflection and brightness».
To obtain a quick and reliable result of testing the means of traffic organization in our company there is a specialized mobile laboratory, which is equipped with the necessary modern equipment to assess the quality of road marking; retroreflective properties of road signs; as well as determining the thickness of the protective layer and the geometric parameters of the barrier fence; measuring the quality of road lighting; quality assessment of noise protection screens; measuring the coefficient of adhesion of the wheel to the coating; certification of marking machines for road marking.

Road markings and signs are key infrastructural safety factors, as they play a very important informative function. These means of traffic organization should inform road users about the rules of the road, the trajectory, speed and danger factors on the road. Accordingly, road markings and signs must comply with regulatory requirements.
To check the compliance of traffic management facilities with regulatory requirements, it is necessary to assess the quality of road marking; retroreflective properties of road signs.
Determination of brightness and retroreflective properties of road markings is carried out according to SOU 42.1-37641918-117: 2014 “Road safety. Road marking. Technical requirements and methods of control of indicators of light reflection and brightness».
To obtain a quick and reliable result of testing the means of traffic organization in our company there is a specialized mobile laboratory, which is equipped with the necessary modern equipment to assess the quality of road marking; retroreflective properties of road signs; as well as determining the thickness of the protective layer and the geometric parameters of the barrier fence; measuring the quality of road lighting; quality assessment of noise protection screens; measuring the coefficient of adhesion of the wheel to the coating; certification of marking machines for road marking.

Carried out to establish the completeness and reliability of operational and acceptance control in accordance with the requirements of applicable regulations. Based on the results of field measurements, a protocol is drawn up indicating the conclusion on the compliance of the measured indicators with regulatory and design requirements.

Carried out to establish the completeness and reliability of operational and acceptance control in accordance with the requirements of applicable regulations. Based on the results of field measurements, a protocol is drawn up indicating the conclusion on the compliance of the measured indicators with regulatory and design requirements.

Carried out to establish the completeness and reliability of operational and acceptance control in accordance with the requirements of applicable regulations. Based on the results of field measurements, a protocol is drawn up indicating the conclusion on the compliance of the measured indicators with regulatory and design requirements.

Carried out to establish the completeness and reliability of operational and acceptance control in accordance with the requirements of applicable regulations. Based on the results of field measurements, a protocol is drawn up indicating the conclusion on the compliance of the measured indicators with regulatory and design requirements.

Carried out to establish the completeness and reliability of operational and acceptance control in accordance with the requirements of applicable regulations. Based on the results of field measurements, a protocol is drawn up indicating the conclusion on the compliance of the measured indicators with regulatory and design requirements.

Carried out to establish the completeness and reliability of operational and acceptance control in accordance with the requirements of applicable regulations. Based on the results of field measurements, a protocol is drawn up indicating the conclusion on the compliance of the measured indicators with regulatory and design requirements.

Carried out to establish the completeness and reliability of operational and acceptance control in accordance with the requirements of applicable regulations. Based on the results of field measurements, a protocol is drawn up indicating the conclusion on the compliance of the measured indicators with regulatory and design requirements.

Technical supervision during the performance of repair and construction works on construction / repair sites is carried out in accordance with the Resolution of the Cabinet of Ministers of 11.07.2007 “On author’s and technical supervision during the construction of an architectural object”.
Engineering and technical support of the construction / repair facility is carried out in accordance with SOU 42.1-37641918-087: 2019 “Roads. Engineering and technical support for the construction of road facilities. ”
Scientific and technical support of the construction / repair facility is carried out in accordance with DBN B.1.2-5: 2007 “System for ensuring the reliability and safety of construction sites. Scientific and technical support of construction objects “.
Comprehensive engineering services provide support during the entire period of repair and construction works, which will ensure quality control and reliability of the construction site. Services include monitoring compliance with regulatory requirements, visual and instrumental inspections, measurements and tests, quality control of building materials, products and structures, providing advisory and informational assistance in resolving problematic issues, etc.

Technical supervision during the performance of repair and construction works on construction / repair sites is carried out in accordance with the Resolution of the Cabinet of Ministers of 11.07.2007 “On author’s and technical supervision during the construction of an architectural object”.
Engineering and technical support of the construction / repair facility is carried out in accordance with SOU 42.1-37641918-087: 2019 “Roads. Engineering and technical support for the construction of road facilities. ”
Scientific and technical support of the construction / repair facility is carried out in accordance with DBN B.1.2-5: 2007 “System for ensuring the reliability and safety of construction sites. Scientific and technical support of construction objects “.
Comprehensive engineering services provide support during the entire period of repair and construction works, which will ensure quality control and reliability of the construction site. Services include monitoring compliance with regulatory requirements, visual and instrumental inspections, measurements and tests, quality control of building materials, products and structures, providing advisory and informational assistance in resolving problematic issues, etc.

Technical supervision during the performance of repair and construction works on construction / repair sites is carried out in accordance with the Resolution of the Cabinet of Ministers of 11.07.2007 “On author’s and technical supervision during the construction of an architectural object”.
Engineering and technical support of the construction / repair facility is carried out in accordance with SOU 42.1-37641918-087: 2019 “Roads. Engineering and technical support for the construction of road facilities. ”
Scientific and technical support of the construction / repair facility is carried out in accordance with DBN B.1.2-5: 2007 “System for ensuring the reliability and safety of construction sites. Scientific and technical support of construction objects “.
Comprehensive engineering services provide support during the entire period of repair and construction works, which will ensure quality control and reliability of the construction site. Services include monitoring compliance with regulatory requirements, visual and instrumental inspections, measurements and tests, quality control of building materials, products and structures, providing advisory and informational assistance in resolving problematic issues, etc.

Technical supervision during the performance of repair and construction works on construction / repair sites is carried out in accordance with the Resolution of the Cabinet of Ministers of 11.07.2007 “On author’s and technical supervision during the construction of an architectural object”.
Engineering and technical support of the construction / repair facility is carried out in accordance with SOU 42.1-37641918-087: 2019 “Roads. Engineering and technical support for the construction of road facilities. ”
Scientific and technical support of the construction / repair facility is carried out in accordance with DBN B.1.2-5: 2007 “System for ensuring the reliability and safety of construction sites. Scientific and technical support of construction objects “.
Comprehensive engineering services provide support during the entire period of repair and construction works, which will ensure quality control and reliability of the construction site. Services include monitoring compliance with regulatory requirements, visual and instrumental inspections, measurements and tests, quality control of building materials, products and structures, providing advisory and informational assistance in resolving problematic issues, etc.

Technical supervision during the performance of repair and construction works on construction / repair sites is carried out in accordance with the Resolution of the Cabinet of Ministers of 11.07.2007 “On author’s and technical supervision during the construction of an architectural object”.
Engineering and technical support of the construction / repair facility is carried out in accordance with SOU 42.1-37641918-087: 2019 “Roads. Engineering and technical support for the construction of road facilities. ”
Scientific and technical support of the construction / repair facility is carried out in accordance with DBN B.1.2-5: 2007 “System for ensuring the reliability and safety of construction sites. Scientific and technical support of construction objects “.
Comprehensive engineering services provide support during the entire period of repair and construction works, which will ensure quality control and reliability of the construction site. Services include monitoring compliance with regulatory requirements, visual and instrumental inspections, measurements and tests, quality control of building materials, products and structures, providing advisory and informational assistance in resolving problematic issues, etc.

Technical supervision during the performance of repair and construction works on construction / repair sites is carried out in accordance with the Resolution of the Cabinet of Ministers of 11.07.2007 “On author’s and technical supervision during the construction of an architectural object”.
Engineering and technical support of the construction / repair facility is carried out in accordance with SOU 42.1-37641918-087: 2019 “Roads. Engineering and technical support for the construction of road facilities. ”
Scientific and technical support of the construction / repair facility is carried out in accordance with DBN B.1.2-5: 2007 “System for ensuring the reliability and safety of construction sites. Scientific and technical support of construction objects “.
Comprehensive engineering services provide support during the entire period of repair and construction works, which will ensure quality control and reliability of the construction site. Services include monitoring compliance with regulatory requirements, visual and instrumental inspections, measurements and tests, quality control of building materials, products and structures, providing advisory and informational assistance in resolving problematic issues, etc.

Technical supervision during the performance of repair and construction works on construction / repair sites is carried out in accordance with the Resolution of the Cabinet of Ministers of 11.07.2007 “On author’s and technical supervision during the construction of an architectural object”.
Engineering and technical support of the construction / repair facility is carried out in accordance with SOU 42.1-37641918-087: 2019 “Roads. Engineering and technical support for the construction of road facilities. ”
Scientific and technical support of the construction / repair facility is carried out in accordance with DBN B.1.2-5: 2007 “System for ensuring the reliability and safety of construction sites. Scientific and technical support of construction objects “.
Comprehensive engineering services provide support during the entire period of repair and construction works, which will ensure quality control and reliability of the construction site. Services include monitoring compliance with regulatory requirements, visual and instrumental inspections, measurements and tests, quality control of building materials, products and structures, providing advisory and informational assistance in resolving problematic issues, etc.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests to determine the physical and mechanical properties of asphalt mixtures in accordance with the requirements of DSTU B B.2.7-119: 2011” Asphalt mixtures and asphalt concrete road and airfield. Technical conditions “and DSTU B B.2.7-127: 2015” Mixtures of asphalt concrete and asphalt concrete crushed stone-mastic. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Specifications”.

Laboratory tests of bituminous mixtures are carried out in accordance with DSTU B B.2.7-306: 2015 “Road bituminous mixtures. Test methods “for compliance with the requirements of DSTU B B.2.7-305: 2015” Bituminous road mixtures. General technical conditions “.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests of asphalt concrete samples for compliance with the requirements of DSTU B B.2.7-119: 2011” Mixtures of asphalt concrete and asphalt concrete road and airfield. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Technical conditions “, DBN B.2.3-4: 2015″ Roads. Part I. Design. Part II. Construction”.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests of asphalt concrete samples for compliance with the requirements of DSTU B B.2.7-119: 2011” Mixtures of asphalt concrete and asphalt concrete road and airfield. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Technical conditions “, DBN B.2.3-4: 2015″ Roads. Part I. Design. Part II. Construction”.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests of asphalt concrete samples for compliance with the requirements of DSTU B B.2.7-119: 2011” Mixtures of asphalt concrete and asphalt concrete road and airfield. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Technical conditions “, DBN B.2.3-4: 2015″ Roads. Part I. Design. Part II. Construction”.

Test center of SE “Dorcentr” according to DSTU B B.2.7-319: 2016 “Mixtures of asphalt concrete and asphalt concrete road and airfield. Test methods “conducts laboratory tests of asphalt concrete samples for compliance with the requirements of DSTU B B.2.7-119: 2011” Mixtures of asphalt concrete and asphalt concrete road and airfield. Technical conditions “, DSTU 8959: 2019 Asphalt concrete mixtures and road asphalt concrete based on bitumen modified with polymers. Technical conditions “, DBN B.2.3-4: 2015″ Roads. Part I. Design. Part II. Construction”.

The test center of the State Enterprise “Dorcentr” conducts laboratory tests of road bitumen emulsions in accordance with the requirements of DSTU B B.2.7-129: 2013 “Road bitumen emulsions. Specifications”.

The test center of the State Enterprise “Dorcentr” conducts laboratory tests of road bitumen emulsions in accordance with the requirements of DSTU B B.2.7-129: 2013 “Road bitumen emulsions. Specifications”.

The test center of the State Enterprise “Dorcentr” conducts laboratory tests of road bitumen emulsions in accordance with the requirements of DSTU B B.2.7-129: 2013 “Road bitumen emulsions. Specifications”.

The test center of the State Enterprise “Dorcentr” conducts laboratory tests of road bitumen emulsions in accordance with the requirements of DSTU B B.2.7-129: 2013 “Road bitumen emulsions. Specifications”.

The test center of the State Enterprise “Dorcentr” conducts laboratory tests of road bitumen emulsions in accordance with the requirements of DSTU B B.2.7-129: 2013 “Road bitumen emulsions. Specifications”.

The test center of the State Enterprise “Dorcentr” conducts laboratory tests of road bitumen emulsions in accordance with the requirements of DSTU B B.2.7-129: 2013 “Road bitumen emulsions. Specifications”.

The test center of the State Enterprise “Dorcentr” conducts laboratory tests of road bitumen emulsions in accordance with the requirements of DSTU B B.2.7-129: 2013 “Road bitumen emulsions. Specifications”.

The test center of the State Enterprise “Dorcentr” conducts laboratory tests of road bitumen emulsions in accordance with the requirements of DSTU B B.2.7-129: 2013 “Road bitumen emulsions. Specifications”.

Test center of SE “Dorcentr” according to DSTU 8977: 2020 “Road materials made by cold recycling technology. Test methods “conducts laboratory tests of road materials made by cold recycling technology for compliance with the requirements of DSTU 8976: 2020″ Road materials made by cold recycling technology. Specifications”.

Test center of SE “Dorcentr” according to DSTU 8977: 2020 “Road materials made by cold recycling technology. Test methods “conducts laboratory tests of road materials made by cold recycling technology for compliance with the requirements of DSTU 8976: 2020″ Road materials made by cold recycling technology. Specifications”.

Test center of SE “Dorcentr” according to DSTU 8977: 2020 “Road materials made by cold recycling technology. Test methods “conducts laboratory tests of road materials made by cold recycling technology for compliance with the requirements of DSTU 8976: 2020″ Road materials made by cold recycling technology. Specifications”.

Test center of SE “Dorcentr” according to DSTU 8977: 2020 “Road materials made by cold recycling technology. Test methods “conducts laboratory tests of road materials made by cold recycling technology for compliance with the requirements of DSTU 8976: 2020″ Road materials made by cold recycling technology. Specifications”.

Test center of SE “Dorcentr” according to DSTU 8977: 2020 “Road materials made by cold recycling technology. Test methods “conducts laboratory tests of road materials made by cold recycling technology for compliance with the requirements of DSTU 8976: 2020″ Road materials made by cold recycling technology. Specifications”.

Test center of SE “Dorcentr” according to DSTU 8977: 2020 “Road materials made by cold recycling technology. Test methods “conducts laboratory tests of road materials made by cold recycling technology for compliance with the requirements of DSTU 8976: 2020″ Road materials made by cold recycling technology. Specifications”.

Test center of SE “Dorcentr” according to DSTU 8977: 2020 “Road materials made by cold recycling technology. Test methods “conducts laboratory tests of road materials made by cold recycling technology for compliance with the requirements of DSTU 8976: 2020″ Road materials made by cold recycling technology. Specifications”.

Testing of cement-concrete samples in accordance with the requirements of DSTU B B.2.7-43-96 “Heavy concretes. Specifications” and gravel-sand mixture treated with inorganic binders, in accordance with DSTU B B.2.7-207: 2009 “Building materials. Gravel, gravel and sandy, treated with inorganic binders. Specifications “.

Testing of cement-concrete samples in accordance with the requirements of DSTU B B.2.7-43-96 “Heavy concretes. Specifications” and gravel-sand mixture treated with inorganic binders, in accordance with DSTU B B.2.7-207: 2009 “Building materials. Gravel, gravel and sandy, treated with inorganic binders. Specifications “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of cement according to “DSTU B B.2.7-46: 2010 Building materials. Cements of general construction purpose. Technical conditions”.

The test center of DP “Dorcentr” carries out laboratory researches of properties of cement according to “DSTU B B.2.7-46: 2010 Building materials. Cements of general construction purpose. Technical conditions”.

The test center of DP “Dorcentr” carries out laboratory researches of properties of cement according to “DSTU B B.2.7-46: 2010 Building materials. Cements of general construction purpose. Technical conditions”.

The test center of DP “Dorcentr” carries out laboratory researches of properties of cement according to “DSTU B B.2.7-46: 2010 Building materials. Cements of general construction purpose. Technical conditions”.

Procedure for product certification ПОР 001-21476215:2018

• 1. Submission of application for certification of products in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Establishment of the product certification scheme (Definition of the certification scheme depends on the type and volume of products, state of production, quality system operating in production and other initial data);
• 3. Consideration of the application, analysis of the submitted documentation and decision-making on the application;
• 4. Preparation and signing of the contract;
• 5. Selection and identification of product samples for testing;
• 6. Product testing;
• 7. Production inspection (if provided by the certification scheme);
• 8. Analysis of evaluation results, tests;
• 9. Preparation and issuance of certificates of conformity (refusal), and entry of the certificate of conformity in the register of the Authority.

Schemes used during product certification:

• 1. Product batch certification;
• 2. Certification of products manufactured in series with:
  – inspection of production;
• 3. Certification of products manufactured in series with
  – certification of production;

For questions about the products certification, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Certificate example

Procedure for product certification ПОР 001-21476215:2018

• 1. Submission of application for certification of products in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Establishment of the product certification scheme (Definition of the certification scheme depends on the type and volume of products, state of production, quality system operating in production and other initial data);
• 3. Consideration of the application, analysis of the submitted documentation and decision-making on the application;
• 4. Preparation and signing of the contract;
• 5. Selection and identification of product samples for testing;
• 6. Product testing;
• 7. Production inspection (if provided by the certification scheme);
• 8. Analysis of evaluation results, tests;
• 9. Preparation and issuance of certificates of conformity (refusal), and entry of the certificate of conformity in the register of the Authority.

Schemes used during product certification:

• 1. Product batch certification;
• 2. Certification of products manufactured in series with:
  – inspection of production;
• 3. Certification of products manufactured in series with
  – certification of production;

For questions about the products certification, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Certificate example

Procedure for product certification ПОР 001-21476215:2018

• 1. Submission of application for certification of products in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Establishment of the product certification scheme (Definition of the certification scheme depends on the type and volume of products, state of production, quality system operating in production and other initial data);
• 3. Consideration of the application, analysis of the submitted documentation and decision-making on the application;
• 4. Preparation and signing of the contract;
• 5. Selection and identification of product samples for testing;
• 6. Product testing;
• 7. Production inspection (if provided by the certification scheme);
• 8. Analysis of evaluation results, tests;
• 9. Preparation and issuance of certificates of conformity (refusal), and entry of the certificate of conformity in the register of the Authority.

Schemes used during product certification:

• 1. Product batch certification;
• 2. Certification of products manufactured in series with:
  – inspection of production;
• 3. Certification of products manufactured in series with
  – certification of production;

For questions about the products certification, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Certificate example

Procedure for product certification ПОР 001-21476215:2018

• 1. Submission of application for certification of products in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Establishment of the product certification scheme (Definition of the certification scheme depends on the type and volume of products, state of production, quality system operating in production and other initial data);
• 3. Consideration of the application, analysis of the submitted documentation and decision-making on the application;
• 4. Preparation and signing of the contract;
• 5. Selection and identification of product samples for testing;
• 6. Product testing;
• 7. Production inspection (if provided by the certification scheme);
• 8. Analysis of evaluation results, tests;
• 9. Preparation and issuance of certificates of conformity (refusal), and entry of the certificate of conformity in the register of the Authority.

Schemes used during product certification:

• 1. Product batch certification;
• 2. Certification of products manufactured in series with:
  – inspection of production;
• 3. Certification of products manufactured in series with
  – certification of production;

For questions about the products certification, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Certificate example

Procedure for product certification ПОР 001-21476215:2018

• 1. Submission of application for certification of products in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Establishment of the product certification scheme (Definition of the certification scheme depends on the type and volume of products, state of production, quality system operating in production and other initial data);
• 3. Consideration of the application, analysis of the submitted documentation and decision-making on the application;
• 4. Preparation and signing of the contract;
• 5. Selection and identification of product samples for testing;
• 6. Product testing;
• 7. Production inspection (if provided by the certification scheme);
• 8. Analysis of evaluation results, tests;
• 9. Preparation and issuance of certificates of conformity (refusal), and entry of the certificate of conformity in the register of the Authority.

Schemes used during product certification:

• 1. Product batch certification;
• 2. Certification of products manufactured in series with:
  – inspection of production;
• 3. Certification of products manufactured in series with
  – certification of production;

For questions about the products certification, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Certificate example

Procedure for product certification ПОР 001-21476215:2018

• 1. Submission of application for certification of products in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Establishment of the product certification scheme (Definition of the certification scheme depends on the type and volume of products, state of production, quality system operating in production and other initial data);
• 3. Consideration of the application, analysis of the submitted documentation and decision-making on the application;
• 4. Preparation and signing of the contract;
• 5. Selection and identification of product samples for testing;
• 6. Product testing;
• 7. Production inspection (if provided by the certification scheme);
• 8. Analysis of evaluation results, tests;
• 9. Preparation and issuance of certificates of conformity (refusal), and entry of the certificate of conformity in the register of the Authority.

Schemes used during product certification:

• 1. Product batch certification;
• 2. Certification of products manufactured in series with:
  – inspection of production;
• 3. Certification of products manufactured in series with
  – certification of production;

For questions about the products certification, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Certificate example

Procedure for product certification ПОР 001-21476215:2018

• 1. Submission of application for certification of products in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Establishment of the product certification scheme (Definition of the certification scheme depends on the type and volume of products, state of production, quality system operating in production and other initial data);
• 3. Consideration of the application, analysis of the submitted documentation and decision-making on the application;
• 4. Preparation and signing of the contract;
• 5. Selection and identification of product samples for testing;
• 6. Product testing;
• 7. Production inspection (if provided by the certification scheme);
• 8. Analysis of evaluation results, tests;
• 9. Preparation and issuance of certificates of conformity (refusal), and entry of the certificate of conformity in the register of the Authority.

Schemes used during product certification:

• 1. Product batch certification;
• 2. Certification of products manufactured in series with:
  – inspection of production;
• 3. Certification of products manufactured in series with
  – certification of production;

For questions about the products certification, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Certificate example

Procedure for product certification ПОР 001-21476215:2018

• 1. Submission of application for certification of products in accordance with the established form (the application is submitted on the official form of the customer, signed by the authorized representative of the customer. Along with the application is provided questionnaire and information about production. applications should be sent to the actual address of Dorcentre, and scanned copies to the e-mail address: dorsert@ukr.net);
• 2. Establishment of the product certification scheme (Definition of the certification scheme depends on the type and volume of products, state of production, quality system operating in production and other initial data);
• 3. Consideration of the application, analysis of the submitted documentation and decision-making on the application;
• 4. Preparation and signing of the contract;
• 5. Selection and identification of product samples for testing;
• 6. Product testing;
• 7. Production inspection (if provided by the certification scheme);
• 8. Analysis of evaluation results, tests;
• 9. Preparation and issuance of certificates of conformity (refusal), and entry of the certificate of conformity in the register of the Authority.

Schemes used during product certification:

• 1. Product batch certification;
• 2. Certification of products manufactured in series with:
  – inspection of production;
• 3. Certification of products manufactured in series with
  – certification of production;

For questions about the products certification, contact Ponomarenko Ilya Petrovich, тел.+38(044) 574 02 90

Download the application form and the questionnaire

Certificate example

The test center of SE “Dorcentr” conducts tests to determine the compliance of mineral powder with the requirements of DSTU B B.2.7-121: 2014 “Mineral powder for asphalt mixtures. Specifications”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of mineral powder with the requirements of DSTU B B.2.7-121: 2014 “Mineral powder for asphalt mixtures. Specifications”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of mineral powder with the requirements of DSTU B B.2.7-121: 2014 “Mineral powder for asphalt mixtures. Specifications”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of mineral powder with the requirements of DSTU B B.2.7-121: 2014 “Mineral powder for asphalt mixtures. Specifications”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of mineral powder with the requirements of DSTU B B.2.7-121: 2014 “Mineral powder for asphalt mixtures. Specifications”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of mineral powder with the requirements of DSTU B B.2.7-121: 2014 “Mineral powder for asphalt mixtures. Specifications”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of mineral powder with the requirements of DSTU B B.2.7-121: 2014 “Mineral powder for asphalt mixtures. Specifications”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of mineral powder with the requirements of DSTU B B.2.7-121: 2014 “Mineral powder for asphalt mixtures. Specifications”.

Dorcentr Testing Center tests anti-icing materials that are manufactured and used in liquid or solid form to combat winter slipperiness on public roads, in accordance with the requirements of DSTU 8853: 2019 “Anti-icing materials for roads. Specifications”.

Dorcentr Testing Center tests anti-icing materials that are manufactured and used in liquid or solid form to combat winter slipperiness on public roads, in accordance with the requirements of DSTU 8853: 2019 “Anti-icing materials for roads. Specifications”.

Dorcentr Testing Center tests anti-icing materials that are manufactured and used in liquid or solid form to combat winter slipperiness on public roads, in accordance with the requirements of DSTU 8853: 2019 “Anti-icing materials for roads. Specifications”.

Dorcentr Testing Center tests anti-icing materials that are manufactured and used in liquid or solid form to combat winter slipperiness on public roads, in accordance with the requirements of DSTU 8853: 2019 “Anti-icing materials for roads. Specifications”.

Dorcentr Testing Center tests anti-icing materials that are manufactured and used in liquid or solid form to combat winter slipperiness on public roads, in accordance with the requirements of DSTU 8853: 2019 “Anti-icing materials for roads. Specifications”.

Центр випробувань ДП “Дорцентр” проводить випробування щодо визначення відповідності піску вимогам ДСТУ Б В.2.7-210:2010 “Будівельні матеріали. Пісок із відсівів дроблення вивержених гірських порід для будівельних робіт. Технічні умови”.

Центр випробувань ДП “Дорцентр” проводить випробування щодо визначення відповідності піску вимогам ДСТУ Б В.2.7-210:2010 “Будівельні матеріали. Пісок із відсівів дроблення вивержених гірських порід для будівельних робіт. Технічні умови”.

Центр випробувань ДП “Дорцентр” проводить випробування щодо визначення відповідності піску вимогам ДСТУ Б В.2.7-210:2010 “Будівельні матеріали. Пісок із відсівів дроблення вивержених гірських порід для будівельних робіт. Технічні умови”.

Центр випробувань ДП “Дорцентр” проводить випробування щодо визначення відповідності піску вимогам ДСТУ Б В.2.7-210:2010 “Будівельні матеріали. Пісок із відсівів дроблення вивержених гірських порід для будівельних робіт. Технічні умови”.

Центр випробувань ДП “Дорцентр” проводить випробування щодо визначення відповідності піску вимогам ДСТУ Б В.2.7-210:2010 “Будівельні матеріали. Пісок із відсівів дроблення вивержених гірських порід для будівельних робіт. Технічні умови”.

Центр випробувань ДП “Дорцентр” проводить випробування щодо визначення відповідності піску вимогам ДСТУ Б В.2.7-210:2010 “Будівельні матеріали. Пісок із відсівів дроблення вивержених гірських порід для будівельних робіт. Технічні умови”.

Центр випробувань ДП “Дорцентр” проводить випробування щодо визначення відповідності піску вимогам ДСТУ Б В.2.7-210:2010 “Будівельні матеріали. Пісок із відсівів дроблення вивержених гірських порід для будівельних робіт. Технічні умови”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

The test center of SE “Dorcentr” conducts tests to determine the compliance of crushed stone with the requirements of DSTU B B.2.7-75-98 “Rubble and gravel are dense natural for building materials, products, structures and works. Technical conditions”.

The test center of SE “Dorcentr” conducts tests of crushed stone-sand mixture in accordance with the requirements of DSTU B B.2.7-30: 2013 “Non-metallic materials for crushed stone and gravel bases and pavements of roads. General technical conditions”.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

Dorcentr Testing Center tests soils to determine the particle size distribution of soil, humidity (optimal, hygroscopic, on the verge of fluidity and rolling), soil density, filtration rate, etc. in accordance with applicable regulations.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of DP “Dorcentr” carries out laboratory researches of properties of bitumens of oil road viscous and modified according to requirements of DSTU 4044: 2019 “Bitumens oil road viscous. Technical conditions”, DSTU B B.2.7-135: 2014 “Bitumens road, modified polymers. Technical conditions “, DSTU B B.2.7-313: 2016” Road bitumens modified with additive complexes. Technical conditions “.

The test center of SE “Dorcentr” tests materials for sealing seams and cracks in road and aerodrome surfaces in accordance with the requirements of DSTU B B.2.7-136: 2016 “Materials for sealing seams and cracks in pavements of roads. General technical requirements”.

The test center of SE “Dorcentr” tests materials for sealing seams and cracks in road and aerodrome surfaces in accordance with the requirements of DSTU B B.2.7-136: 2016 “Materials for sealing seams and cracks in pavements of roads. General technical requirements”.

The test center of SE “Dorcentr” tests materials for sealing seams and cracks in road and aerodrome surfaces in accordance with the requirements of DSTU B B.2.7-136: 2016 “Materials for sealing seams and cracks in pavements of roads. General technical requirements”.

The test center of SE “Dorcentr” tests materials for sealing seams and cracks in road and aerodrome surfaces in accordance with the requirements of DSTU B B.2.7-136: 2016 “Materials for sealing seams and cracks in pavements of roads. General technical requirements”.

The test center of Dorcentr conducts tests of paints used for horizontal marking of public roads, in accordance with SOU 42.1.-37641918-116: 2014 “Paint for horizontal marking of roads. Technical requirements and test methods”.

The test center of Dorcentr conducts tests of paints used for horizontal marking of public roads, in accordance with SOU 42.1.-37641918-116: 2014 “Paint for horizontal marking of roads. Technical requirements and test methods”.

The test center of Dorcentr conducts tests of paints used for horizontal marking of public roads, in accordance with SOU 42.1.-37641918-116: 2014 “Paint for horizontal marking of roads. Technical requirements and test methods”.

The test center of Dorcentr conducts tests of paints used for horizontal marking of public roads, in accordance with SOU 42.1.-37641918-116: 2014 “Paint for horizontal marking of roads. Technical requirements and test methods”.

The test center of Dorcentr conducts tests of paints used for horizontal marking of public roads, in accordance with SOU 42.1.-37641918-116: 2014 “Paint for horizontal marking of roads. Technical requirements and test methods”.

The test center of Dorcentr conducts tests of paints used for horizontal marking of public roads, in accordance with SOU 42.1.-37641918-116: 2014 “Paint for horizontal marking of roads. Technical requirements and test methods”.

The test center of Dorcentr conducts tests of paints used for horizontal marking of public roads, in accordance with SOU 42.1.-37641918-116: 2014 “Paint for horizontal marking of roads. Technical requirements and test methods”.

The test center of Dorcentr conducts tests of paints used for horizontal marking of public roads, in accordance with SOU 42.1.-37641918-116: 2014 “Paint for horizontal marking of roads. Technical requirements and test methods”.

The test center of Dorcentr conducts tests of paints used for horizontal marking of public roads, in accordance with SOU 42.1.-37641918-116: 2014 “Paint for horizontal marking of roads. Technical requirements and test methods”.